SN74AC573PW – Texas Instruments
April 25, 2026
Looking for the SN74AC573PW by Texas Instruments? This d-type transparent latch 1 channel 8:8 ic tri-state 20-tssop is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The SN74AC573PW is classified under Logic in the Integrated Circuits (ICs) category, part of the 74AC series.
SN74AC573PW Specifications
| Parameter |
Value |
| Logic Type |
D-Type Transparent Latch |
| Circuit |
8:8 |
| Output Type |
Tri-State |
| Voltage – Supply |
2V ~ 6V |
| Independent Circuits |
1 |
| Delay Time – Propagation |
2.5ns |
| Current – Output High, Low |
24mA, 24mA |
| Operating Temperature |
-40°C ~ 85°C |
| Mounting Type |
Surface Mount |
| Package / Case |
20-TSSOP (0.173", 4.40mm Width) |
| Supplier Device Package |
20-TSSOP |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: 3,380 units
- Standard Lead Time: 6 weeks
Datasheet
Download the official SN74AC573PW datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source SN74AC573PW from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the SN74AC573PW? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
IRF740 – STMicroelectronics
April 25, 2026
Looking for the IRF740 by STMicroelectronics? This n-channel 400 v 10a (tc) 125w (tc) through hole to-220 is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The IRF740 is classified under Transistors in the Discrete Semiconductor Products category, part of the PowerMESH™ II series.
IRF740 Specifications
| Parameter |
Value |
| FET Type |
N-Channel |
| Technology |
MOSFET (Metal Oxide) |
| Drain to Source Voltage (Vdss) |
400 V |
| Current – Continuous Drain (Id) @ 25°C |
10A (Tc) |
| Drive Voltage (Max Rds On, Min Rds On) |
10V |
| Rds On (Max) @ Id, Vgs |
550mOhm @ 5.3A, 10V |
| Vgs(th) (Max) @ Id |
4V @ 250µA |
| Gate Charge (Qg) (Max) @ Vgs |
43 nC @ 10 V |
| Vgs (Max) |
±20V |
| Input Capacitance (Ciss) (Max) @ Vds |
1400 pF @ 25 V |
| Power Dissipation (Max) |
125W (Tc) |
| Operating Temperature |
-65°C ~ 150°C (TJ) |
| Mounting Type |
Through Hole |
| Supplier Device Package |
TO-220 |
| Package / Case |
TO-220-3 |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
Datasheet
Download the official IRF740 datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source IRF740 from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the IRF740? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
LM7924CT – onsemi
April 25, 2026
Looking for the LM7924CT by onsemi? This linear voltage regulator ic negative fixed 1 output 1a to-220-3 is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The LM7924CT is classified under Power Management (PMIC) in the Integrated Circuits (ICs) category.
LM7924CT Specifications
| Parameter |
Value |
| Output Configuration |
Negative |
| Output Type |
Fixed |
| Number of Regulators |
1 |
| Voltage – Input (Max) |
-35V |
| Voltage – Output (Min/Fixed) |
-24V |
| Voltage Dropout (Max) |
2V @ 1A (Typ) |
| Current – Output |
1A |
| Current – Quiescent (Iq) |
6 mA |
| PSRR |
60dB (120Hz) |
| Protection Features |
Over Temperature, Short Circuit |
| Operating Temperature |
0°C ~ 125°C |
| Mounting Type |
Through Hole |
| Package / Case |
TO-220-3 |
| Supplier Device Package |
TO-220-3 |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 46 weeks
- Last Time Buy Date: 2 March 2011
Datasheet
Download the official LM7924CT datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source LM7924CT from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the LM7924CT? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
IFX25401TBV50ATMA1 – Infineon Technologies
April 24, 2026
Looking for the IFX25401TBV50ATMA1 by Infineon Technologies? This linear voltage regulator ic positive fixed 1 output 400ma to-263-5 is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The IFX25401TBV50ATMA1 is classified under Power Management (PMIC) in the Integrated Circuits (ICs) category.
IFX25401TBV50ATMA1 Specifications
| Parameter |
Value |
| Output Configuration |
Positive |
| Output Type |
Fixed |
| Number of Regulators |
1 |
| Voltage – Input (Max) |
40V |
| Voltage – Output (Min/Fixed) |
5V |
| Voltage Dropout (Max) |
0.5V @ 250mA |
| Current – Output |
400mA |
| Current – Quiescent (Iq) |
220 µA |
| Current – Supply (Max) |
25 mA |
| PSRR |
54dB (100Hz) |
| Protection Features |
Over Current, Over Temperature, Reverse Polarity, Short Circuit |
| Operating Temperature |
-40°C ~ 125°C |
| Mounting Type |
Surface Mount |
| Package / Case |
TO-263-6, D2PAK (5 Leads + Tab), TO-263BA |
| Supplier Device Package |
TO-263-5 |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 8 weeks
- Last Time Buy Date: 31 July 2018
Datasheet
Download the official IFX25401TBV50ATMA1 datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source IFX25401TBV50ATMA1 from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the IFX25401TBV50ATMA1? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
CD4047BCN – onsemi
April 24, 2026
Looking for the CD4047BCN by onsemi? This monostable multivibrator 80 ns 14-mdip is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The CD4047BCN is classified under Logic in the Integrated Circuits (ICs) category, part of the 4000B series.
CD4047BCN Specifications
| Parameter |
Value |
| Logic Type |
Astable, Monostable |
| Independent Circuits |
1 |
| Schmitt Trigger Input |
No |
| Propagation Delay |
80 ns |
| Current – Output High, Low |
8.8mA, 8.8mA |
| Voltage – Supply |
3 V ~ 15 V |
| Operating Temperature |
-55°C ~ 125°C |
| Mounting Type |
Through Hole |
| Package / Case |
14-DIP (0.300", 7.62mm) |
| Supplier Device Package |
14-MDIP |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 10 weeks
- Last Time Buy Date: 2 March 2011
Datasheet
Download the official CD4047BCN datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source CD4047BCN from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the CD4047BCN? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
LT1085CT-3.3 – Analog Devices Inc.
April 24, 2026
Looking for the LT1085CT-3.3 by Analog Devices Inc.? This linear voltage regulator ic 1 output 3a to-220-3 is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The LT1085CT-3.3 is classified under Power Management (PMIC) in the Integrated Circuits (ICs) category.
LT1085CT-3.3 Specifications
| Parameter |
Value |
| Number of Regulators |
1 |
| Current – Output |
3A |
| Operating Temperature |
0°C ~ 125°C |
| Mounting Type |
Through Hole |
| Package / Case |
TO-220-3 |
| Supplier Device Package |
TO-220-3 |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 13 weeks
Datasheet
Download the official LT1085CT-3.3 datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source LT1085CT-3.3 from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the LT1085CT-3.3? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
LM4040AIM3-4.1 – Texas Instruments
April 24, 2026
Looking for the LM4040AIM3-4.1 by Texas Instruments? This shunt voltage reference ic fixed 4.096v v ±0.1% 15 ma sot-23-3 is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The LM4040AIM3-4.1 is classified under Power Management (PMIC) in the Integrated Circuits (ICs) category.
LM4040AIM3-4.1 Specifications
| Parameter |
Value |
| Reference Type |
Shunt |
| Output Type |
Fixed |
| Voltage – Output (Min/Fixed) |
4.096V |
| Current – Output |
15 mA |
| Tolerance |
±0.1% |
| Temperature Coefficient |
100ppm/°C |
| Noise – 10Hz to 10kHz |
80µVrms |
| Current – Cathode |
73 µA |
| Operating Temperature |
-40°C ~ 85°C (TA) |
| Mounting Type |
Surface Mount |
| Package / Case |
TO-236-3, SC-59, SOT-23-3 |
| Supplier Device Package |
SOT-23-3 |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: 14 units
- Standard Lead Time: 26 weeks
- Last Time Buy Date: 6 March 2024
Datasheet
Download the official LM4040AIM3-4.1 datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source LM4040AIM3-4.1 from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the LM4040AIM3-4.1? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
LP2980AIM5-3.3 – Texas Instruments
April 24, 2026
Looking for the LP2980AIM5-3.3 by Texas Instruments? This linear voltage regulator ic positive fixed 1 output 50ma sot-23-5 is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The LP2980AIM5-3.3 is classified under Power Management (PMIC) in the Integrated Circuits (ICs) category.
LP2980AIM5-3.3 Specifications
| Parameter |
Value |
| Output Configuration |
Positive |
| Output Type |
Fixed |
| Number of Regulators |
1 |
| Voltage – Input (Max) |
16V |
| Voltage – Output (Min/Fixed) |
3.3V |
| Voltage Dropout (Max) |
0.22V @ 50mA |
| Current – Output |
50mA |
| Current – Quiescent (Iq) |
95 µA |
| Current – Supply (Max) |
1.2 mA |
| PSRR |
63dB (1kHz) |
| Control Features |
Enable |
| Protection Features |
Over Current, Over Temperature, Short Circuit |
| Operating Temperature |
-40°C ~ 125°C |
| Mounting Type |
Surface Mount |
| Package / Case |
SC-74A, SOT-753 |
| Supplier Device Package |
SOT-23-5 |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 12 weeks
- Last Time Buy Date: 18 March 2024
Datasheet
Download the official LP2980AIM5-3.3 datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source LP2980AIM5-3.3 from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the LP2980AIM5-3.3? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
SN74AHCT574PW – Texas Instruments
April 24, 2026
Looking for the SN74AHCT574PW by Texas Instruments? This flip flop 1 element d-type 8 bit positive edge 20-tssop (0.173", 4.40mm width) is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The SN74AHCT574PW is classified under Logic in the Integrated Circuits (ICs) category, part of the 74AHCT series.
SN74AHCT574PW Specifications
| Parameter |
Value |
| Function |
Standard |
| Type |
D-Type |
| Output Type |
Tri-State, Non-Inverted |
| Number of Elements |
1 |
| Number of Bits per Element |
8 |
| Clock Frequency |
115 MHz |
| Max Propagation Delay @ V, Max CL |
10.6ns @ 5V, 50pF |
| Trigger Type |
Positive Edge |
| Current – Output High, Low |
8mA, 8mA |
| Voltage – Supply |
4.5V ~ 5.5V |
| Current – Quiescent (Iq) |
4 µA |
| Input Capacitance |
3 pF |
| Operating Temperature |
-40°C ~ 85°C (TA) |
| Mounting Type |
Surface Mount |
| Supplier Device Package |
20-TSSOP |
| Package / Case |
20-TSSOP (0.173", 4.40mm Width) |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: 46,771 units
- Standard Lead Time: 6 weeks
Datasheet
Download the official SN74AHCT574PW datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source SN74AHCT574PW from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the SN74AHCT574PW? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
MAX1044CSA – Analog Devices Inc./Maxim Integrated
April 24, 2026
Looking for the MAX1044CSA by Analog Devices Inc./Maxim Integrated? This charge pump switching regulator ic positive or negative fixed -vin, nvin, vin/2 1 output 20ma 8-soic (0.154", 3.90mm width) is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The MAX1044CSA is classified under Power Management (PMIC) in the Integrated Circuits (ICs) category.
MAX1044CSA Specifications
| Parameter |
Value |
| Function |
Ratiometric |
| Output Configuration |
Positive or Negative |
| Topology |
Charge Pump |
| Output Type |
Fixed |
| Number of Outputs |
1 |
| Voltage – Input (Min) |
1.5V |
| Voltage – Input (Max) |
10V |
| Voltage – Output (Min/Fixed) |
-Vin, nVin, Vin/2 |
| Current – Output |
20mA |
| Frequency – Switching |
10kHz |
| Synchronous Rectifier |
No |
| Operating Temperature |
0°C ~ 70°C (TA) |
| Mounting Type |
Surface Mount |
| Package / Case |
8-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package |
8-SOIC |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 14 weeks
- Last Time Buy Date: 16 July 2016
Datasheet
Download the official MAX1044CSA datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source MAX1044CSA from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the MAX1044CSA? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.