All Components › Analog Devices Inc./Maxim Integrated
Showing 55 Analog Devices Inc./Maxim Integrated components tracked by ICCorders. We specialise in sourcing hard-to-find and obsolete ICs — if you need a Analog Devices Inc./Maxim Integrated part that is out of stock or end-of-life, request a quote and we will source it for you.
MAX3053ESA+T – Analog Devices Inc./Maxim Integrated
May 4, 2026
Looking for the MAX3053ESA+T by Analog Devices Inc./Maxim Integrated? This 1/1 transceiver full canbus 8-soic is currently available. ICCorders offers competitive pricing with verified, tested components and payment terms.
The MAX3053ESA+T is classified under Interface in the Integrated Circuits (ICs) category.
MAX3053ESA+T Specifications
| Parameter |
Value |
| Type |
Transceiver |
| Protocol |
CANbus |
| Number of Drivers/Receivers |
1/1 |
| Duplex |
Full |
| Receiver Hysteresis |
150 mV |
| Data Rate |
2Mbps |
| Voltage – Supply |
4.5V ~ 5.5V |
| Operating Temperature |
-40°C ~ 85°C |
| Mounting Type |
Surface Mount |
| Package / Case |
8-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package |
8-SOIC |
Availability & Supply Status
- Status: In Stock
- Lifecycle: Active
- Distribution Stock: 1,266 units
- Standard Lead Time: 10 weeks
Datasheet
Download the official MAX3053ESA+T datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source MAX3053ESA+T from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the MAX3053ESA+T? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
MAX4617ESE – Analog Devices Inc./Maxim Integrated
May 4, 2026
Looking for the MAX4617ESE by Analog Devices Inc./Maxim Integrated? This 1 circuit ic switch 8:1 10ohm 16-soic is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The MAX4617ESE is classified under Interface in the Integrated Circuits (ICs) category.
MAX4617ESE Specifications
| Parameter |
Value |
| Multiplexer/Demultiplexer Circuit |
8:1 |
| Number of Circuits |
1 |
| On-State Resistance (Max) |
10Ohm |
| Channel-to-Channel Matching (ΔRon) |
200mOhm |
| Voltage – Supply, Single (V+) |
2V ~ 5.5V |
| Switch Time (Ton, Toff) (Max) |
15ns, 10ns |
| Charge Injection |
3pC |
| Channel Capacitance (CS(off), CD(off)) |
5pF, 27pF |
| Current – Leakage (IS(off)) (Max) |
1nA |
| Crosstalk |
-96dB @ 100kHz |
| Operating Temperature |
-40°C ~ 85°C (TA) |
| Mounting Type |
Surface Mount |
| Package / Case |
16-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package |
16-SOIC |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 12 weeks
Datasheet
Download the official MAX4617ESE datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source MAX4617ESE from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the MAX4617ESE? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
MAX14840EASA+T – Analog Devices Inc./Maxim Integrated
May 4, 2026
Looking for the MAX14840EASA+T by Analog Devices Inc./Maxim Integrated? This 1/1 transceiver half rs422, rs485 8-soic is currently available. ICCorders offers competitive pricing with verified, tested components and payment terms.
The MAX14840EASA+T is classified under Interface in the Integrated Circuits (ICs) category.
MAX14840EASA+T Specifications
| Parameter |
Value |
| Type |
Transceiver |
| Protocol |
RS422, RS485 |
| Number of Drivers/Receivers |
1/1 |
| Duplex |
Half |
| Receiver Hysteresis |
50 mV |
| Data Rate |
40Mbps |
| Voltage – Supply |
3V ~ 3.6V |
| Operating Temperature |
-40°C ~ 125°C |
| Mounting Type |
Surface Mount |
| Package / Case |
8-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package |
8-SOIC |
Availability & Supply Status
- Status: In Stock
- Lifecycle: Active
- Distribution Stock: 5,841 units
- Standard Lead Time: 10 weeks
Datasheet
Download the official MAX14840EASA+T datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source MAX14840EASA+T from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the MAX14840EASA+T? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
MAX1811ESA – Analog Devices Inc./Maxim Integrated
May 3, 2026
Looking for the MAX1811ESA by Analog Devices Inc./Maxim Integrated? This charger ic lithium ion 8-soic is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The MAX1811ESA is classified under Power Management (PMIC) in the Integrated Circuits (ICs) category.
MAX1811ESA Specifications
| Parameter |
Value |
| Battery Chemistry |
Lithium Ion |
| Number of Cells |
1 |
| Current – Charging |
Constant |
| Fault Protection |
Over Current |
| Charge Current – Max |
500mA |
| Battery Pack Voltage |
4.2V |
| Voltage – Supply (Max) |
6.5V |
| Interface |
USB |
| Operating Temperature |
-40°C ~ 85°C (TA) |
| Mounting Type |
Surface Mount |
| Package / Case |
8-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package |
8-SOIC |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 12 weeks
- Last Time Buy Date: 22 March 2015
Datasheet
Download the official MAX1811ESA datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source MAX1811ESA from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the MAX1811ESA? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
MAX4052AESE – Analog Devices Inc./Maxim Integrated
May 1, 2026
Looking for the MAX4052AESE by Analog Devices Inc./Maxim Integrated? This 2 circuit ic switch 4:1 100ohm 16-soic is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The MAX4052AESE is classified under Interface in the Integrated Circuits (ICs) category.
MAX4052AESE Specifications
| Parameter |
Value |
| Switch Circuit |
SP4T |
| Multiplexer/Demultiplexer Circuit |
4:1 |
| Number of Circuits |
2 |
| On-State Resistance (Max) |
100Ohm |
| Channel-to-Channel Matching (ΔRon) |
6Ohm (Max) |
| Voltage – Supply, Single (V+) |
2V ~ 16V |
| Voltage – Supply, Dual (V±) |
±2.7V ~ 8V |
| Switch Time (Ton, Toff) (Max) |
175ns, 150ns |
| Charge Injection |
2pC |
| Channel Capacitance (CS(off), CD(off)) |
2pF, 2pF |
| Current – Leakage (IS(off)) (Max) |
100pA |
| Crosstalk |
-90dB @ 100kHz |
| Operating Temperature |
-40°C ~ 85°C (TA) |
| Mounting Type |
Surface Mount |
| Package / Case |
16-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package |
16-SOIC |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 16 weeks
Datasheet
Download the official MAX4052AESE datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source MAX4052AESE from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the MAX4052AESE? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
MAX488CSA – Analog Devices Inc./Maxim Integrated
April 30, 2026
Looking for the MAX488CSA by Analog Devices Inc./Maxim Integrated? This 1/1 transceiver full rs422, rs485 8-soic is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The MAX488CSA is classified under Interface in the Integrated Circuits (ICs) category.
MAX488CSA Specifications
| Parameter |
Value |
| Type |
Transceiver |
| Protocol |
RS422, RS485 |
| Number of Drivers/Receivers |
1/1 |
| Duplex |
Full |
| Receiver Hysteresis |
70 mV |
| Data Rate |
250kbps |
| Voltage – Supply |
4.75V ~ 5.25V |
| Operating Temperature |
0°C ~ 70°C |
| Mounting Type |
Surface Mount |
| Package / Case |
8-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package |
8-SOIC |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 16 weeks
Datasheet
Download the official MAX488CSA datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source MAX488CSA from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the MAX488CSA? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
MAX4618ESE – Analog Devices Inc./Maxim Integrated
April 30, 2026
Looking for the MAX4618ESE by Analog Devices Inc./Maxim Integrated? This 2 circuit ic switch 4:1 10ohm 16-soic is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The MAX4618ESE is classified under Interface in the Integrated Circuits (ICs) category.
MAX4618ESE Specifications
| Parameter |
Value |
| Switch Circuit |
SP4T |
| Multiplexer/Demultiplexer Circuit |
4:1 |
| Number of Circuits |
2 |
| On-State Resistance (Max) |
10Ohm |
| Channel-to-Channel Matching (ΔRon) |
200mOhm |
| Voltage – Supply, Single (V+) |
2V ~ 5.5V |
| Switch Time (Ton, Toff) (Max) |
15ns, 10ns |
| Charge Injection |
3pC |
| Channel Capacitance (CS(off), CD(off)) |
5pF, 15pF |
| Current – Leakage (IS(off)) (Max) |
1nA |
| Crosstalk |
-96dB @ 100kHz |
| Operating Temperature |
-40°C ~ 85°C (TA) |
| Mounting Type |
Surface Mount |
| Package / Case |
16-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package |
16-SOIC |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 16 weeks
Datasheet
Download the official MAX4618ESE datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source MAX4618ESE from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the MAX4618ESE? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
MAX4053AESE – Analog Devices Inc./Maxim Integrated
April 30, 2026
Looking for the MAX4053AESE by Analog Devices Inc./Maxim Integrated? This 3 circuit ic switch 2:1 100ohm 16-soic is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The MAX4053AESE is classified under Interface in the Integrated Circuits (ICs) category.
MAX4053AESE Specifications
| Parameter |
Value |
| Switch Circuit |
SPDT |
| Multiplexer/Demultiplexer Circuit |
2:1 |
| Number of Circuits |
3 |
| On-State Resistance (Max) |
100Ohm |
| Channel-to-Channel Matching (ΔRon) |
6Ohm (Max) |
| Voltage – Supply, Single (V+) |
2V ~ 16V |
| Voltage – Supply, Dual (V±) |
±2.7V ~ 8V |
| Switch Time (Ton, Toff) (Max) |
175ns, 150ns |
| Charge Injection |
2pC |
| Channel Capacitance (CS(off), CD(off)) |
2pF, 2pF |
| Current – Leakage (IS(off)) (Max) |
100pA |
| Crosstalk |
-90dB @ 100kHz |
| Operating Temperature |
-40°C ~ 85°C (TA) |
| Mounting Type |
Surface Mount |
| Package / Case |
16-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package |
16-SOIC |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 16 weeks
Datasheet
Download the official MAX4053AESE datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source MAX4053AESE from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the MAX4053AESE? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
MAX232ACPE – Analog Devices Inc./Maxim Integrated
April 29, 2026
Looking for the MAX232ACPE by Analog Devices Inc./Maxim Integrated? This 2/2 transceiver full rs232 16-pdip is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The MAX232ACPE is classified under Interface in the Integrated Circuits (ICs) category.
MAX232ACPE Specifications
| Parameter |
Value |
| Type |
Transceiver |
| Protocol |
RS232 |
| Number of Drivers/Receivers |
2/2 |
| Duplex |
Full |
| Receiver Hysteresis |
500 mV |
| Data Rate |
200kbps |
| Voltage – Supply |
4.5V ~ 5.5V |
| Operating Temperature |
0°C ~ 70°C |
| Mounting Type |
Through Hole |
| Package / Case |
16-DIP (0.300", 7.62mm) |
| Supplier Device Package |
16-PDIP |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 16 weeks
Datasheet
Download the official MAX232ACPE datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source MAX232ACPE from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the MAX232ACPE? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
MAX17048G+T10 – Analog Devices Inc./Maxim Integrated
April 29, 2026
Looking for the MAX17048G+T10 by Analog Devices Inc./Maxim Integrated? This battery battery monitor ic lithium ion 8-tdfn-ep (2×2) is currently available. ICCorders offers competitive pricing with verified, tested components and payment terms.
The MAX17048G+T10 is classified under Power Management (PMIC) in the Integrated Circuits (ICs) category, part of the ModelGauge™ series.
MAX17048G+T10 Specifications
| Parameter |
Value |
| Function |
Battery Monitor |
| Battery Chemistry |
Lithium Ion |
| Number of Cells |
1 |
| Interface |
I2C |
| Operating Temperature |
-20°C ~ 70°C (TA) |
| Mounting Type |
Surface Mount |
| Package / Case |
8-WFDFN Exposed Pad |
| Supplier Device Package |
8-TDFN-EP (2×2) |
Availability & Supply Status
- Status: In Stock
- Lifecycle: Active
- Distribution Stock: 20,423 units
- Standard Lead Time: 16 weeks
Datasheet
Download the official MAX17048G+T10 datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source MAX17048G+T10 from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the MAX17048G+T10? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.