SN74AHC126PW – Texas Instruments
May 5, 2026
Looking for the SN74AHC126PW by Texas Instruments? This buffer, non-inverting 4 element 1 bit per element 3-state output 14-tssop is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The SN74AHC126PW is classified under Logic in the Integrated Circuits (ICs) category, part of the 74AHC series.
SN74AHC126PW Specifications
| Parameter |
Value |
| Logic Type |
Buffer, Non-Inverting |
| Number of Elements |
4 |
| Number of Bits per Element |
1 |
| Output Type |
3-State |
| Current – Output High, Low |
8mA, 8mA |
| Voltage – Supply |
2V ~ 5.5V |
| Operating Temperature |
-40°C ~ 85°C (TA) |
| Mounting Type |
Surface Mount |
| Package / Case |
14-TSSOP (0.173", 4.40mm Width) |
| Supplier Device Package |
14-TSSOP |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: 330 units
- Standard Lead Time: 12 weeks
Datasheet
Download the official SN74AHC126PW datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source SN74AHC126PW from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the SN74AHC126PW? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
LM386N-4 – Texas Instruments
May 5, 2026
Looking for the LM386N-4 by Texas Instruments? This amplifier ic 1-channel (mono) class ab 8-pdip is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The LM386N-4 is classified under Linear in the Integrated Circuits (ICs) category.
LM386N-4 Specifications
| Parameter |
Value |
| Type |
Class AB |
| Output Type |
1-Channel (Mono) |
| Max Output Power x Channels @ Load |
1W x 1 @ 32Ohm |
| Voltage – Supply |
5V ~ 18V |
| Mounting Type |
Through Hole |
| Operating Temperature |
0°C ~ 70°C (TA) |
| Supplier Device Package |
8-PDIP |
| Package / Case |
8-DIP (0.300", 7.62mm) |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 8 weeks
- Last Time Buy Date: 11 February 2015
Datasheet
Download the official LM386N-4 datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source LM386N-4 from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the LM386N-4? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
GS66506TMRXUSA1 – Infineon Technologies
May 5, 2026
Looking for the GS66506TMRXUSA1 by Infineon Technologies? This n-channel 650 v 22.5a (tc) surface mount is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The GS66506TMRXUSA1 is classified under Transistors in the Discrete Semiconductor Products category.
GS66506TMRXUSA1 Specifications
| Parameter |
Value |
| FET Type |
N-Channel |
| Technology |
GaNFET (Gallium Nitride) |
| Drain to Source Voltage (Vdss) |
650 V |
| Current – Continuous Drain (Id) @ 25°C |
22.5A (Tc) |
| Drive Voltage (Max Rds On, Min Rds On) |
6V |
| Rds On (Max) @ Id, Vgs |
90mOhm @ 6.7A, 6V |
| Vgs(th) (Max) @ Id |
1.3V @ 5mA |
| Gate Charge (Qg) (Max) @ Vgs |
4.4 nC @ 6 V |
| Vgs (Max) |
+7V, -10V |
| Input Capacitance (Ciss) (Max) @ Vds |
195 pF @ 400 V |
| Operating Temperature |
-55°C ~ 150°C (TJ) |
| Mounting Type |
Surface Mount |
| Package / Case |
4-SMD, No Lead |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 98 weeks
- Last Time Buy Date: 31 January 2026
Datasheet
Download the official GS66506TMRXUSA1 datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source GS66506TMRXUSA1 from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the GS66506TMRXUSA1? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
SN74AHCT126PW – Texas Instruments
May 5, 2026
Looking for the SN74AHCT126PW by Texas Instruments? This buffer, non-inverting 4 element 1 bit per element 3-state output 14-tssop is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The SN74AHCT126PW is classified under Logic in the Integrated Circuits (ICs) category, part of the 74AHCT series.
SN74AHCT126PW Specifications
| Parameter |
Value |
| Logic Type |
Buffer, Non-Inverting |
| Number of Elements |
4 |
| Number of Bits per Element |
1 |
| Output Type |
3-State |
| Current – Output High, Low |
8mA, 8mA |
| Voltage – Supply |
4.5V ~ 5.5V |
| Operating Temperature |
-40°C ~ 125°C (TA) |
| Mounting Type |
Surface Mount |
| Package / Case |
14-TSSOP (0.173", 4.40mm Width) |
| Supplier Device Package |
14-TSSOP |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: 11,429 units
- Standard Lead Time: 20 weeks
Datasheet
Download the official SN74AHCT126PW datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source SN74AHCT126PW from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the SN74AHCT126PW? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
MC4558CN – STMicroelectronics
May 5, 2026
Looking for the MC4558CN by STMicroelectronics? This standard (general purpose) amplifier 2 circuit 8-mini dip is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The MC4558CN is classified under Linear in the Integrated Circuits (ICs) category.
MC4558CN Specifications
| Parameter |
Value |
| Amplifier Type |
Standard (General Purpose) |
| Number of Circuits |
2 |
| Slew Rate |
2.2V/µs |
| Gain Bandwidth Product |
5.5 MHz |
| Current – Input Bias |
50 nA |
| Voltage – Input Offset |
1 mV |
| Current – Supply |
2.3mA |
| Current – Output / Channel |
20 mA |
| Voltage – Supply Span (Min) |
4 V |
| Voltage – Supply Span (Max) |
40 V |
| Operating Temperature |
0°C ~ 70°C |
| Mounting Type |
Through Hole |
| Package / Case |
8-DIP (0.300", 7.62mm) |
| Supplier Device Package |
8-Mini DIP |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 13 weeks
Datasheet
Download the official MC4558CN datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source MC4558CN from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the MC4558CN? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
ATA6662-TAQY 19 – Microchip Technology
May 4, 2026
Looking for the ATA6662-TAQY 19 by Microchip Technology? This 1/1 transceiver half linbus 8-so is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The ATA6662-TAQY 19 is classified under Interface in the Integrated Circuits (ICs) category.
ATA6662-TAQY 19 Specifications
| Parameter |
Value |
| Type |
Transceiver |
| Protocol |
LINbus |
| Number of Drivers/Receivers |
1/1 |
| Duplex |
Half |
| Receiver Hysteresis |
500 mV |
| Voltage – Supply |
5V ~ 27V |
| Operating Temperature |
-40°C ~ 125°C |
| Mounting Type |
Surface Mount |
| Package / Case |
8-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package |
8-SO |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 32 weeks
- Last Time Buy Date: 30 September 2012
Datasheet
Download the official ATA6662-TAQY 19 datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source ATA6662-TAQY 19 from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the ATA6662-TAQY 19? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
LM7812CT – onsemi
May 4, 2026
Looking for the LM7812CT by onsemi? This linear voltage regulator ic positive fixed 1 output 1a to-220-3 is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The LM7812CT is classified under Power Management (PMIC) in the Integrated Circuits (ICs) category.
LM7812CT Specifications
| Parameter |
Value |
| Output Configuration |
Positive |
| Output Type |
Fixed |
| Number of Regulators |
1 |
| Voltage – Input (Max) |
35V |
| Voltage – Output (Min/Fixed) |
12V |
| Voltage Dropout (Max) |
2V @ 1A (Typ) |
| Current – Output |
1A |
| Current – Quiescent (Iq) |
8 mA |
| PSRR |
71dB (120Hz) |
| Protection Features |
Over Temperature, Short Circuit |
| Operating Temperature |
-40°C ~ 125°C |
| Mounting Type |
Through Hole |
| Package / Case |
TO-220-3 |
| Supplier Device Package |
TO-220-3 |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 4 weeks
- Last Time Buy Date: 22 June 2018
Datasheet
Download the official LM7812CT datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source LM7812CT from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the LM7812CT? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
IR25600PBF – Infineon Technologies
May 4, 2026
Looking for the IR25600PBF by Infineon Technologies? This low-side gate driver ic non-inverting 8-pdip is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The IR25600PBF is classified under Power Management (PMIC) in the Integrated Circuits (ICs) category.
IR25600PBF Specifications
| Parameter |
Value |
| DigiKey Programmable |
Not Verified |
| Driven Configuration |
Low-Side |
| Channel Type |
Independent |
| Number of Drivers |
2 |
| Gate Type |
IGBT, MOSFET (N-Channel) |
| Voltage – Supply |
6V ~ 20V |
| Logic Voltage – VIL, VIH |
0.8V, 2.7V |
| Current – Peak Output (Source, Sink) |
2.3A, 3.3A |
| Input Type |
Non-Inverting |
| Rise / Fall Time (Typ) |
15ns, 10ns |
| Operating Temperature |
-40°C ~ 150°C (TJ) |
| Mounting Type |
Through Hole |
| Package / Case |
8-DIP (0.300", 7.62mm) |
| Supplier Device Package |
8-PDIP |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 26 weeks
- Last Time Buy Date: 31 March 2021
Datasheet
Download the official IR25600PBF datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source IR25600PBF from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the IR25600PBF? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
CD4519BCN – onsemi
May 4, 2026
Looking for the CD4519BCN by onsemi? This and/or select ic 16-pdip is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The CD4519BCN is classified under Logic in the Integrated Circuits (ICs) category, part of the 4000B series.
CD4519BCN Specifications
| Parameter |
Value |
| Logic Type |
AND/OR Select |
| Number of Bits |
4 |
| Mounting Type |
Through Hole |
| Package / Case |
16-DIP (0.300", 7.62mm) |
| Supplier Device Package |
16-PDIP |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
Why Source CD4519BCN from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the CD4519BCN? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.
MAX4617ESE – Analog Devices Inc./Maxim Integrated
May 4, 2026
Looking for the MAX4617ESE by Analog Devices Inc./Maxim Integrated? This 1 circuit ic switch 8:1 10ohm 16-soic is increasingly difficult to source through standard distribution channels. ICCorders specialises in sourcing hard-to-find and obsolete ICs with full traceability and testing.
The MAX4617ESE is classified under Interface in the Integrated Circuits (ICs) category.
MAX4617ESE Specifications
| Parameter |
Value |
| Multiplexer/Demultiplexer Circuit |
8:1 |
| Number of Circuits |
1 |
| On-State Resistance (Max) |
10Ohm |
| Channel-to-Channel Matching (ΔRon) |
200mOhm |
| Voltage – Supply, Single (V+) |
2V ~ 5.5V |
| Switch Time (Ton, Toff) (Max) |
15ns, 10ns |
| Charge Injection |
3pC |
| Channel Capacitance (CS(off), CD(off)) |
5pF, 27pF |
| Current – Leakage (IS(off)) (Max) |
1nA |
| Crosstalk |
-96dB @ 100kHz |
| Operating Temperature |
-40°C ~ 85°C (TA) |
| Mounting Type |
Surface Mount |
| Package / Case |
16-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package |
16-SOIC |
Availability & Supply Status
- Status: Obsolete – We Can Source
- Lifecycle: Obsolete
- Distribution Stock: Not available through standard distribution
- Standard Lead Time: 12 weeks
Datasheet
Download the official MAX4617ESE datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.
Why Source MAX4617ESE from ICCorders?
- Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
- Full Traceability: Complete documentation and chain of custody for every part.
- Global Sourcing Network: Access to stock that standard distributors cannot reach.
- Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.
Request a Quote
Need the MAX4617ESE? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.