IC ORDERS.com

All Components › UMW

Showing 14 UMW components tracked by ICCorders. We specialise in sourcing hard-to-find and obsolete ICs — if you need a UMW part that is out of stock or end-of-life, request a quote and we will source it for you.

SP3485EEN – UMW

Looking for the SP3485EEN by UMW? This 1/1 transceiver half rs422, rs485 8-sop is currently available. ICCorders offers competitive pricing with verified, tested components and payment terms.

The SP3485EEN is classified under Interface in the Integrated Circuits (ICs) category.

SP3485EEN Specifications

Parameter Value
Type Transceiver
Protocol RS422, RS485
Number of Drivers/Receivers 1/1
Duplex Half
Receiver Hysteresis 30 mV
Data Rate 12Mbps
Voltage – Supply 2.97V ~ 3.63V
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOP

Availability & Supply Status

  • Status: In Stock
  • Lifecycle: Active
  • Distribution Stock: 2,845 units
  • Standard Lead Time: 8 weeks

Datasheet

Download the official SP3485EEN datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.

Why Source SP3485EEN from ICCorders?

  • Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
  • Full Traceability: Complete documentation and chain of custody for every part.
  • Global Sourcing Network: Access to stock that standard distributors cannot reach.
  • Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.

Request a Quote

Need the SP3485EEN? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.


LM2575S-3.3 – UMW

Looking for the LM2575S-3.3 by UMW? This buck switching regulator ic positive fixed 3.3v 1 output 2a to-263-6, d2pak (5 leads + tab), to-263ba is currently available. ICCorders offers competitive pricing with verified, tested components and payment terms.

The LM2575S-3.3 is classified under Power Management (PMIC) in the Integrated Circuits (ICs) category, part of the LM2575 series.

LM2575S-3.3 Specifications

Parameter Value
Function Step-Down
Output Configuration Positive
Topology Buck
Output Type Fixed
Number of Outputs 1
Voltage – Input (Max) 40V
Voltage – Output (Min/Fixed) 3.3V
Current – Output 2A
Frequency – Switching 150kHz
Synchronous Rectifier No
Operating Temperature -40°C ~ 125°C (TJ)
Mounting Type Surface Mount
Package / Case TO-263-6, D2PAK (5 Leads + Tab), TO-263BA
Supplier Device Package TO-263-5L

Availability & Supply Status

  • Status: In Stock
  • Lifecycle: Active
  • Distribution Stock: 546 units
  • Standard Lead Time: 8 weeks

Datasheet

Download the official LM2575S-3.3 datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.

Why Source LM2575S-3.3 from ICCorders?

  • Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
  • Full Traceability: Complete documentation and chain of custody for every part.
  • Global Sourcing Network: Access to stock that standard distributors cannot reach.
  • Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.

Request a Quote

Need the LM2575S-3.3? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.


LM2596S-3.3 – UMW

Looking for the LM2596S-3.3 by UMW? This buck switching regulator ic positive fixed 3.3v 1 output 3a to-263-6, d2pak (5 leads + tab), to-263ba is currently available. ICCorders offers competitive pricing with verified, tested components and payment terms.

The LM2596S-3.3 is classified under Power Management (PMIC) in the Integrated Circuits (ICs) category, part of the LM2596 series.

LM2596S-3.3 Specifications

Parameter Value
Function Step-Down
Output Configuration Positive
Topology Buck
Output Type Fixed
Number of Outputs 1
Voltage – Input (Max) 40V
Voltage – Output (Min/Fixed) 3.3V
Current – Output 3A
Frequency – Switching 150kHz
Synchronous Rectifier No
Operating Temperature -40°C ~ 125°C (TA)
Mounting Type Surface Mount
Package / Case TO-263-6, D2PAK (5 Leads + Tab), TO-263BA
Supplier Device Package TO-263-5L

Availability & Supply Status

  • Status: In Stock
  • Lifecycle: Active
  • Distribution Stock: 1,724 units
  • Standard Lead Time: 8 weeks

Datasheet

Download the official LM2596S-3.3 datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.

Why Source LM2596S-3.3 from ICCorders?

  • Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
  • Full Traceability: Complete documentation and chain of custody for every part.
  • Global Sourcing Network: Access to stock that standard distributors cannot reach.
  • Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.

Request a Quote

Need the LM2596S-3.3? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.


HT7530-1 – UMW

Looking for the HT7530-1 by UMW? This linear voltage regulator ic positive fixed 1 output 100ma sot-89-3 is currently available. ICCorders offers competitive pricing with verified, tested components and payment terms.

The HT7530-1 is classified under Power Management (PMIC) in the Integrated Circuits (ICs) category, part of the 75xx series.

HT7530-1 Specifications

Parameter Value
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage – Input (Max) 30V
Voltage – Output (Min/Fixed) 3V
Voltage Dropout (Max) 0.1V @ 1mA
Current – Output 100mA
Current – Quiescent (Iq) 3 µA
Protection Features Short Circuit
Operating Temperature -25°C ~ 70°C
Mounting Type Surface Mount
Package / Case TO-243AA
Supplier Device Package SOT-89-3

Availability & Supply Status

  • Status: In Stock
  • Lifecycle: Active
  • Distribution Stock: 160 units
  • Standard Lead Time: 8 weeks

Datasheet

Download the official HT7530-1 datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.

Why Source HT7530-1 from ICCorders?

  • Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
  • Full Traceability: Complete documentation and chain of custody for every part.
  • Global Sourcing Network: Access to stock that standard distributors cannot reach.
  • Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.

Request a Quote

Need the HT7530-1? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.


LM2576S-5.0 – UMW

Looking for the LM2576S-5.0 by UMW? This buck switching regulator ic positive fixed 1 output 3a to-263-6, d2pak (5 leads + tab), to-263ba is currently available. ICCorders offers competitive pricing with verified, tested components and payment terms.

The LM2576S-5.0 is classified under Power Management (PMIC) in the Integrated Circuits (ICs) category, part of the LM2576 series.

LM2576S-5.0 Specifications

Parameter Value
Function Step-Down
Output Configuration Positive
Topology Buck
Output Type Fixed
Number of Outputs 1
Voltage – Input (Max) 40V
Voltage – Output (Max) 5V
Current – Output 3A
Frequency – Switching 52kHz
Synchronous Rectifier Yes
Operating Temperature -40°C ~ 125°C (TA)
Mounting Type Surface Mount
Package / Case TO-263-6, D2PAK (5 Leads + Tab), TO-263BA
Supplier Device Package TO-263-5L

Availability & Supply Status

  • Status: In Stock
  • Lifecycle: Active
  • Distribution Stock: 996 units
  • Standard Lead Time: 8 weeks

Datasheet

Download the official LM2576S-5.0 datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.

Why Source LM2576S-5.0 from ICCorders?

  • Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
  • Full Traceability: Complete documentation and chain of custody for every part.
  • Global Sourcing Network: Access to stock that standard distributors cannot reach.
  • Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.

Request a Quote

Need the LM2576S-5.0? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.


OPA340NA – UMW

Looking for the OPA340NA by UMW? This standard (general purpose) amplifier 1 circuit single ended, rail-to-rail sot-23-5 is currently available. ICCorders offers competitive pricing with verified, tested components and payment terms.

The OPA340NA is classified under Linear in the Integrated Circuits (ICs) category, part of the OPA340 series.

OPA340NA Specifications

Parameter Value
Amplifier Type Standard (General Purpose)
Number of Circuits 1
Output Type Single Ended, Rail-to-Rail
Slew Rate 6V/µs
Gain Bandwidth Product 5.5 MHz
Current – Input Bias 0.2 pA
Voltage – Input Offset 150 µV
Current – Supply 750µA
Current – Output / Channel 50 mA
Voltage – Supply Span (Min) 2.7 V
Voltage – Supply Span (Max) 5.5 V
Operating Temperature -55°C ~ 125°C (TA)
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Supplier Device Package SOT-23-5

Availability & Supply Status

  • Status: In Stock
  • Lifecycle: Active
  • Distribution Stock: 552 units
  • Standard Lead Time: 8 weeks

Datasheet

Download the official OPA340NA datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.

Why Source OPA340NA from ICCorders?

  • Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
  • Full Traceability: Complete documentation and chain of custody for every part.
  • Global Sourcing Network: Access to stock that standard distributors cannot reach.
  • Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.

Request a Quote

Need the OPA340NA? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.


LM2596S-5.0 – UMW

Looking for the LM2596S-5.0 by UMW? This buck switching regulator ic positive fixed 5v 1 output 3a to-263-6, d2pak (5 leads + tab), to-263ba is currently available. ICCorders offers competitive pricing with verified, tested components and payment terms.

The LM2596S-5.0 is classified under Power Management (PMIC) in the Integrated Circuits (ICs) category, part of the LM2596 series.

LM2596S-5.0 Specifications

Parameter Value
Function Step-Down
Output Configuration Positive
Topology Buck
Output Type Fixed
Number of Outputs 1
Voltage – Input (Max) 40V
Voltage – Output (Min/Fixed) 5V
Current – Output 3A
Frequency – Switching 150kHz
Synchronous Rectifier No
Operating Temperature -40°C ~ 125°C (TA)
Mounting Type Surface Mount
Package / Case TO-263-6, D2PAK (5 Leads + Tab), TO-263BA
Supplier Device Package TO-263-5L

Availability & Supply Status

  • Status: In Stock
  • Lifecycle: Active
  • Distribution Stock: 1,205 units
  • Standard Lead Time: 8 weeks

Datasheet

Download the official LM2596S-5.0 datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.

Why Source LM2596S-5.0 from ICCorders?

  • Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
  • Full Traceability: Complete documentation and chain of custody for every part.
  • Global Sourcing Network: Access to stock that standard distributors cannot reach.
  • Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.

Request a Quote

Need the LM2596S-5.0? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.


LM2576S-ADJ – UMW

Looking for the LM2576S-ADJ by UMW? This buck switching regulator ic positive adjustable 1 output 3a to-263-6, d2pak (5 leads + tab), to-263ba is currently available. ICCorders offers competitive pricing with verified, tested components and payment terms.

The LM2576S-ADJ is classified under Power Management (PMIC) in the Integrated Circuits (ICs) category, part of the LM2576 series.

LM2576S-ADJ Specifications

Parameter Value
Function Step-Down
Output Configuration Positive
Topology Buck
Output Type Adjustable
Number of Outputs 1
Voltage – Input (Max) 40V
Voltage – Output (Max) 37V
Current – Output 3A
Frequency – Switching 52kHz
Synchronous Rectifier Yes
Operating Temperature -40°C ~ 125°C (TA)
Mounting Type Surface Mount
Package / Case TO-263-6, D2PAK (5 Leads + Tab), TO-263BA
Supplier Device Package TO-263-5L

Availability & Supply Status

  • Status: In Stock
  • Lifecycle: Active
  • Distribution Stock: 309 units
  • Standard Lead Time: 8 weeks

Datasheet

Download the official LM2576S-ADJ datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.

Why Source LM2576S-ADJ from ICCorders?

  • Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
  • Full Traceability: Complete documentation and chain of custody for every part.
  • Global Sourcing Network: Access to stock that standard distributors cannot reach.
  • Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.

Request a Quote

Need the LM2576S-ADJ? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.


AMS1117-1.2 – UMW

Looking for the AMS1117-1.2 by UMW? This linear voltage regulator ic positive fixed 1 output 1a sot-223-3l is currently available. ICCorders offers competitive pricing with verified, tested components and payment terms.

The AMS1117-1.2 is classified under Power Management (PMIC) in the Integrated Circuits (ICs) category.

AMS1117-1.2 Specifications

Parameter Value
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage – Input (Max) 12V
Voltage – Output (Min/Fixed) 1.2V
Voltage Dropout (Max) 1.3V @ 1A
Current – Output 1A
Current – Quiescent (Iq) 10 mA
PSRR 75dB (120Hz)
Control Features Current Limit
Protection Features Over Temperature
Operating Temperature -40°C ~ 125°C (TJ)
Mounting Type Surface Mount
Package / Case TO-261-4, TO-261AA
Supplier Device Package SOT-223-3L

Availability & Supply Status

  • Status: In Stock
  • Lifecycle: Active
  • Distribution Stock: 4,865 units
  • Standard Lead Time: 8 weeks

Datasheet

Download the official AMS1117-1.2 datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.

Why Source AMS1117-1.2 from ICCorders?

  • Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
  • Full Traceability: Complete documentation and chain of custody for every part.
  • Global Sourcing Network: Access to stock that standard distributors cannot reach.
  • Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.

Request a Quote

Need the AMS1117-1.2? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.


LM2596S-ADJ – UMW

Looking for the LM2596S-ADJ by UMW? This buck switching regulator ic positive adjustable 1.2v 1 output 3a to-263-6, d2pak (5 leads + tab), to-263ba is currently available. ICCorders offers competitive pricing with verified, tested components and payment terms.

The LM2596S-ADJ is classified under Power Management (PMIC) in the Integrated Circuits (ICs) category, part of the LM2596 series.

LM2596S-ADJ Specifications

Parameter Value
Function Step-Down
Output Configuration Positive
Topology Buck
Output Type Adjustable
Number of Outputs 1
Voltage – Input (Max) 40V
Voltage – Output (Min/Fixed) 1.2V
Voltage – Output (Max) 37V
Current – Output 3A
Frequency – Switching 150kHz
Synchronous Rectifier No
Operating Temperature -40°C ~ 125°C (TA)
Mounting Type Surface Mount
Package / Case TO-263-6, D2PAK (5 Leads + Tab), TO-263BA
Supplier Device Package TO-263-5L

Availability & Supply Status

  • Status: In Stock
  • Lifecycle: Active
  • Distribution Stock: 618 units
  • Standard Lead Time: 8 weeks

Datasheet

Download the official LM2596S-ADJ datasheet (PDF) for full electrical characteristics, pinout diagrams, and application notes.

Why Source LM2596S-ADJ from ICCorders?

  • Verified & Tested: Every component undergoes rigorous testing. No counterfeits, guaranteed.
  • Full Traceability: Complete documentation and chain of custody for every part.
  • Global Sourcing Network: Access to stock that standard distributors cannot reach.
  • Payment Terms Available: Credit terms for qualified buyers. You don’t pay until you’re satisfied.

Request a Quote

Need the LM2596S-ADJ? Request a quote today or use our BOM Risk Analysis Tool to check your full bill of materials.